News

BOM-H recommended parameter settings cover for timed stop and motor protection.

Recommended BOM-H Settings: Protection Limits and Timed Stop

Record the overload and dry-run limits with their delays, the high and low voltage limits, and the saved RUN duration. Use the timed-stop mode documented for your panel revision and...

Recommended BOM-H Settings: Protection Limits and Timed Stop

Record the overload and dry-run limits with their delays, the high and low voltage limits, and the saved RUN duration. Use the timed-stop mode documented for your panel revision and...

BOM-F recommended parameter settings cover with the VUKAR starter panel and auto-off timer headline.

Recommended BOM-F Settings: Overload, Dry-Run Protection and RUN Timer

Record the BOM-F current limits, trip delays, voltage limits and auto-off time in one settings sheet.

Recommended BOM-F Settings: Overload, Dry-Run Protection and RUN Timer

Record the BOM-F current limits, trip delays, voltage limits and auto-off time in one settings sheet.

VUKAR custom multi-tank water-level controller panel

VUKAR Multi-Tank Water-Level Controller: Installation Planning, Setup and Use

Map the tanks, pumps and valves, confirm the approved control sequence and test each branch before handover.

VUKAR Multi-Tank Water-Level Controller: Installation Planning, Setup and Use

Map the tanks, pumps and valves, confirm the approved control sequence and test each branch before handover.

VUKAR DM-TP-RTLC-96 motor protection meter

VUKAR DM-TP-RTLC-96 Motor Protection Meter: Installation and Clock Timer Settings

Check the DM-TP-RTLC-96 installation, clock and cyclic timer settings and the first supervised pump test.

VUKAR DM-TP-RTLC-96 Motor Protection Meter: Installation and Clock Timer Settings

Check the DM-TP-RTLC-96 installation, clock and cyclic timer settings and the first supervised pump test.

VUKAR DM-TP-LLC-96 motor protection meter

VUKAR DM-TP-LLC-96 Motor Protection Meter: Installation and Water-Level Settings

Check the DM-TP-LLC-96 installation, water-level settings and the first supervised pump test.

VUKAR DM-TP-LLC-96 Motor Protection Meter: Installation and Water-Level Settings

Check the DM-TP-LLC-96 installation, water-level settings and the first supervised pump test.

Water pump not starting automatically illustration with a low roof tank and a closed pump controller

Water Pump Not Starting Automatically When the Tank Is Low?

When a low tank does not start the pump, note what each part of the system is doing before you call the installer.

Water Pump Not Starting Automatically When the Tank Is Low?

When a low tank does not start the pump, note what each part of the system is doing before you call the installer.

Read VUKAR guides on pump controls and starter panels. Our products come from manufacturer Vukar Automation in Rajkot, Gujarat.