News

BOM-V recommended parameter settings cover for level display and run timed stop.

Recommended BOM-V Settings: Tank-Level Display and RUN Timed Stop

Record what the tank level display shows at known water levels and save the RUN duration in minutes for the approved timed-stop mode. Keep the motor protection limits and delays...

Recommended BOM-V Settings: Tank-Level Display and RUN Timed Stop

Record what the tank level display shows at known water levels and save the RUN duration in minutes for the approved timed-stop mode. Keep the motor protection limits and delays...

BOM-T recommended parameter settings cover for clock schedule and borewell cycles.

Recommended BOM-T Settings: Clock Schedule, Run/Rest and Protection

Set the current clock and enabled schedule for the installed BOM-T revision, then record the approved cyclic run and rest intervals and motor protection settings. Keep the time-of-day schedule distinct...

Recommended BOM-T Settings: Clock Schedule, Run/Rest and Protection

Set the current clock and enabled schedule for the installed BOM-T revision, then record the approved cyclic run and rest intervals and motor protection settings. Keep the time-of-day schedule distinct...

BOM-G recommended parameter settings cover for borewell run and recovery.

Recommended BOM-G Settings: Cyclic Run and Rest for Borewell Pumps

Record the run and rest times for the selected cyclic mode and copy the labels exactly as shown on the controller. Depending on revision, the pair can appear as ONT/OFT...

Recommended BOM-G Settings: Cyclic Run and Rest for Borewell Pumps

Record the run and rest times for the selected cyclic mode and copy the labels exactly as shown on the controller. Depending on revision, the pair can appear as ONT/OFT...

BOA-T recommended parameter settings cover for tank control with a weekday schedule.

Recommended BOA-T Settings: Tank-Level Control, Clock and Weekday Schedule

Confirm the low and full tank responses, then set the current clock and selected weekdays for the approved schedule. Record the run and rest values separately and observe a real...

Recommended BOA-T Settings: Tank-Level Control, Clock and Weekday Schedule

Confirm the low and full tank responses, then set the current clock and selected weekdays for the approved schedule. Record the run and rest values separately and observe a real...

BOA-H recommended parameter settings cover for tank switching, run/rst and ast.

Recommended BOA-H Settings: Tank Switching Points, RUN/RST and Start Delay

Document the low and full tank switching points, the RUN and RST times used by the selected cycle, and AST in seconds where automatic starting after power return is commissioned....

Recommended BOA-H Settings: Tank Switching Points, RUN/RST and Start Delay

Document the low and full tank switching points, the RUN and RST times used by the selected cycle, and AST in seconds where automatic starting after power return is commissioned....

BOA-C recommended parameter settings cover for tank-level calls and cyclic timing.

Recommended BOA-C Settings: Tank-Level Control and Cyclic Timing

Record the tank sensor’s low and full responses, the approved filling mode, and the run and rest intervals if the installation uses a repeating cycle. Pair that record with the...

Recommended BOA-C Settings: Tank-Level Control and Cyclic Timing

Record the tank sensor’s low and full responses, the approved filling mode, and the run and rest intervals if the installation uses a repeating cycle. Pair that record with the...

Read VUKAR guides on pump controls and starter panels. Our products come from manufacturer Vukar Automation in Rajkot, Gujarat.