Single Phase Submersible Pump Starter Panel Manufacturer in Rajkot
Mohit VekariaShare
Vukar Automation makes single-phase submersible pump starter panels in Rajkot. If you need a complete starter for a compatible 0.5–3 HP single-phase borewell or openwell pump, BOA-C is the VUKAR range to discuss. It combines starter, tank-level control and a cyclic timer. Send the motor nameplate and the HP you need when you ask for a factory or dealer quote.
When a complete starter panel makes sense
Picture the first week after moving into a house. The borewell pump works, but filling the roof tank means walking out to the starter and coming back to turn it off. If the job needs a new starter as well as automatic tank control, a complete panel is a sensible product to compare. BOA-C is listed for single-phase borewell or openwell pumps and includes a cable float switch for level sensing.
If a working starter is already installed and the job is simply to automate tank filling, describe that to the sales team. A separate level controller might be worth comparing. The right choice depends on what the job needs replaced or added. That is why our quote for a new pump installation can look different from a quote for a retrofit on the same property.

Choose the BOA-C variant you actually need
BOA-C is listed in 0.5, 0.75, 1, 1.5, 2 and 3 HP options. Take the pump phase and rating from the nameplate and let the electrician confirm the panel match and operating current. The example below shows how the catalogue turns an HP number into a model code. A buyer with a compatible 1 HP single-phase borewell pump can ask about BOA-C2, for example.
When the previous starter has failed, an invoice or a clear photo can be easier to use than a memory of the model. For a dealer order, list each required HP on a separate line. An order with four 1 HP units and two 2 HP units should identify which model code goes with each quantity. It saves time when the material is received or sent to different jobs.
| Application | What to ask for |
|---|---|
| 0.5 HP / 0.75 HP | BOA-C0 / BOA-C1 |
| 1 HP / 1.5 HP | BOA-C2 / BOA-C3 |
| 2 HP / 3 HP | BOA-C4 / BOA-C5 |
What to put on the manufacturer quotation
The product listing identifies Vukar Automation in Rajkot as the manufacturer and asks dealers to include BOA-C in their enquiry. Ask for the panel model, number of units, included float switch and delivery terms in writing. For a one-off replacement, you may prefer the product page and its variant selector. For a mixed batch, a quote by model makes each line easier to match.
Tell the installer whether the pump feeds one overhead tank or transfers water between storage tanks. A different tank layout may change the controls you need. Keep the final model code with the pump record. If a replacement is needed later, it is a better reference than asking someone to identify a panel from the colour of the enclosure.
Think about who will receive the panel. For a home replacement, it might be the electrician on the job. For a dealer purchase, it may be someone who sees only a carton and a line on a bill. Writing the variant code next to the motor rating gives both people the same reference. It also means the buyer can ask about a replacement later without describing a panel by its appearance or sending the wrong code from a different pump.
A dealer can ask for a sample quantity before placing a mixed order. Use the first purchase to settle the model, what is supplied, and how the electrician will identify the correct variant on site. The model-specific product page is the reference for the range, while the written quote is the reference for what is being bought. Keep both with the pump or job record.
“Please quote BOA-C2 for a compatible 1 HP single-phase borewell pump. We want overhead tank level control. Nameplate photo attached.”
Buying questions
Is BOA-C a single-phase starter panel?
Yes. The product page lists BOA-C as a single-phase borewell or openwell panel. Ask for the matching range if your motor is three-phase.
Does the quote need my motor nameplate?
It is the simplest way to share the phase, rating and current with the sales team. Include the quantities and delivery PIN as well.