News

BOM-F borewell pump stops early — VUKAR illustrated guide

Borewell Pump Stops Early? BOM-F RUN Timer, Overload and Dry Run

When a BOM-F borewell pump stops early, record elapsed run time and the panel display first. Compare the stop with the saved RUN timer, then look for changes in water...

Borewell Pump Stops Early? BOM-F RUN Timer, Overload and Dry Run

When a BOM-F borewell pump stops early, record elapsed run time and the panel display first. Compare the stop with the saved RUN timer, then look for changes in water...

DM-TP-RTLC-96 recommended parameter settings — VUKAR illustrated guide

Recommended DM-TP-RTLC-96 Settings: Three-Phase Tank Levels, Clock and Cyclic Timer

Set DM-TP-RTLC-96 tank-level and three-phase protection behavior first. Add clock permissions and RUN/RST only after the basic fill and stop sequence is understood.

Recommended DM-TP-RTLC-96 Settings: Three-Phase Tank Levels, Clock and Cyclic Timer

Set DM-TP-RTLC-96 tank-level and three-phase protection behavior first. Add clock permissions and RUN/RST only after the basic fill and stop sequence is understood.

DM-TP-LLC-96 recommended parameter settings — VUKAR illustrated guide

Recommended DM-TP-LLC-96 Settings: Three-Phase Tank Levels, Protection and Cyclic Timer

For DM-TP-LLC-96, establish the low request and full-stop response from the installed level sensors, then commission phase and motor protection and the chosen cyclic behavior.

Recommended DM-TP-LLC-96 Settings: Three-Phase Tank Levels, Protection and Cyclic Timer

For DM-TP-LLC-96, establish the low request and full-stop response from the installed level sensors, then commission phase and motor protection and the chosen cyclic behavior.

DM-TP-CYC-96 recommended parameter settings — VUKAR illustrated guide

Recommended DM-TP-CYC-96 Settings: Three-Phase Protection and Cyclic Run/Rest

Set the DM-TP-CYC-96 protection values for the installed three-phase motor, then choose run and rest intervals from source recovery, steady flow and allowed starts.

Recommended DM-TP-CYC-96 Settings: Three-Phase Protection and Cyclic Run/Rest

Set the DM-TP-CYC-96 protection values for the installed three-phase motor, then choose run and rest intervals from source recovery, steady flow and allowed starts.

DM-TP-CCCT-96 recommended parameter settings — VUKAR illustrated guide

Recommended DM-TP-CCCT-96 Settings: Three-Phase Protection, Clock and Cyclic Timing

Commission the DM-TP-CCCT-96 three-phase protection and phase conditions before programming clock events and RUN/RST. Confirm which timer mode and day are active.

Recommended DM-TP-CCCT-96 Settings: Three-Phase Protection, Clock and Cyclic Timing

Commission the DM-TP-CCCT-96 three-phase protection and phase conditions before programming clock events and RUN/RST. Confirm which timer mode and day are active.

DM-SP-RTLC-96 recommended parameter settings — VUKAR illustrated guide

Recommended DM-SP-RTLC-96 Settings: Single-Phase Tank Levels, Clock and Cyclic Timer

On the DM-SP-RTLC-96, prove the level inputs before adding operating hours. Then record the active days, clock windows and cyclic durations separately so later changes are easy to trace.

Recommended DM-SP-RTLC-96 Settings: Single-Phase Tank Levels, Clock and Cyclic Timer

On the DM-SP-RTLC-96, prove the level inputs before adding operating hours. Then record the active days, clock windows and cyclic durations separately so later changes are easy to trace.

Read VUKAR guides on pump controls and starter panels. Our products come from manufacturer Vukar Automation in Rajkot, Gujarat.