Magel Tyala Solar Pump: Eligibility, Documents and Application Status
Mohit VekariaShare
Apply for the Magel Tyala Solar Pump scheme through MSEDCL’s official Maharashtra portal. First check your water source and the pump capacity linked to your land area. Gather your 7/12 land record and Aadhaar. If you have already applied, use the Beneficiary ID from your SMS to check your application status.
MSEDCL sources and status link checked 8 November 2026
Who can apply and what pump size is listed?
Magel Tyala Saur Krushi Pump Yojana is Maharashtra’s off-grid solar irrigation pump scheme. MSEDCL lists an assured water source among the selection criteria. Examples include wells, borewells and farm ponds. It also lists restrictions on drawing water from reservoirs of water conservation works. Check your water source and past scheme benefits with MSEDCL if your case is unclear.
Swipe sideways on smaller screens to see more columns.
| Agricultural land | Listed capacity |
|---|---|
| Up to 2.5 acres | Up to 3 HP |
| 2.51 to 5 acres | 5 HP |
| Above 5 acres | 7.5 HP |
MSEDCL allows requests for a lower eligible capacity. Its circulars also list a separate route involving 10 HP pumps for eligible 7.5 HP cases. Check the current circular before using that exception. The land band is a scheme rule. Ask the installer to check your water level, discharge head and flow requirement before finalising the pump.
MSEDCL scheme details and land bands · MSEDCL circulars

Documents to keep ready
Swipe sideways on smaller screens to see more columns.
| Document | When you need it |
|---|---|
| 7/12 extract with water-source record | For the farm and water source entered in the form. |
| Aadhaar and an active mobile number | For applicant information and SMS updates. |
| Caste certificate | If applying as an SC or ST beneficiary. |
| Co-owner consent | If you are not the sole owner. |
| Groundwater department NOC | If the water source is in a designated dark zone. |
MSEDCL FAQ and document requirements
Apply, track and pay through the official portal
- Open the relevant application form. Choose the standard new consumer form or the route that matches your case on the MSEDCL site. Enter the land and water-source details as recorded.
- Save your Beneficiary ID. MSEDCL says the applicant receives the ID and updates by SMS. Use the ID in Application Current Status.
- Act on the status shown. Use the portal’s document resubmission or vendor selection option when the status calls for it. Pay the beneficiary contribution only against the official demand.
Open the MSEDCL application form · Check status by Beneficiary ID
How much does the farmer pay?
MSEDCL lists a 10% beneficiary share for general-category farmers and 5% for eligible SC and ST farmers. Use the amount shown in your official demand for payment. An accessible form or status page does not establish approval or an available quota for your application.
MSEDCL renewable energy scheme information · Estimate total pump head before discussing pump size
Quick answers
Does the status page require a new application?
No. Use your existing Beneficiary ID to track a submitted application.
Does the listed HP band guarantee approval?
MSEDCL checks eligibility, documents, water source and applicable scheme conditions. Track the decision on the official portal.