Automatic Water Level Controller Supplier in Hyderabad buying guide featuring the VUKAR DEV-G4.

Automatic Water Level Controller Supplier in Hyderabad

Mohit Vekaria

When comparing an automatic water level controller supplier in Hyderabad, consider VUKAR DEV-G4 when a compatible three-phase transfer pump must run only in agreed staff hours and also respond to both tank levels.

Give late tanker arrivals their own rule

The Hyderabad water board offers tanker booking, and reporting quotes the board on demand from apartments in areas including Uppal and L.B. Nagar. Use a booking record to plan who receives water. Use your own building’s staffing and tank records to decide when to move water upstairs. Late arrivals can leave the sump ready outside the approved pump window. Put that condition on the installer’s acceptance sheet instead of relying on a general automatic setting.

HMWSSB tanker service · Report on Hyderabad apartment tanker demand

What should the caretaker do after 22:30?

Imagine a tanker arrives at 22:30 after the committee’s pump window has ended. The tank now has water. Ask whether the next authorised start should wait until morning, and how the caretaker can see the current tank state before enabling it.

Condition What to agree
Tanker arrives late Record who accepts the delivery
Sump now has water Check the next permitted transfer time
Roof tank needs water Document who can approve an exception

Before you order

Write three decisions before choosing any timing setting. First, who decides the hours when the pump may operate? Second, what should stop a run early? Third, who is responsible if power or water is lost during the run? Read those decisions to the supplier and ask which ones the exact model can handle with the proposed sensors and starter. Confirm any remaining operator action with the person who will do it. During handover, ask for a demonstration of a normal cycle and an interrupted one. Record whether the next run is permitted, delayed or left for the operator to approve.

Related guide · Automatic Water Level Controllers for Tank Filling

VUKAR DEV-G4 product detail
VUKAR DEV-G4 product detail

Product and quote

Write the planned run hours, source-low rule, roof-full rule and who may change the schedule. Ask for a live handover demonstration with the actual starter and two floats.

Put a short operating card beside the pump log. Give the pump a name that matches its label on the drawing. Write the usual start condition, the normal stop and the name of the person who can approve a change. Leave room to record the time, the tank state and any alarm before someone clears it. During handover, have the regular operator explain the sequence back to the installer in their own words. If the two descriptions disagree, resolve that difference while the installer is still there. Keep the model number and the accepted test result with the card.

Compare the installed job, using the same scope for each seller. Ask for the exact model and variant, the included parts, the cost of field cable and any mounting work. Ask who supplies the sensors and who returns if a setting needs correction. A lower panel price can leave out the part of the job that brings the pump back into service. Write the test you expect alongside the price. That makes it clear whether one supplier has quoted equipment only and another has also included fitting, setting up the controls and demonstrating them to the person who operates the pump.

Ask for a quote

Back to blog