Native M1 and M2 comparison for site fit, app features and service.

Urban Company Water Purifier Guide to Native M1 and M2

Mohit Vekaria

Choose an Urban Company water purifier by the exact Native model, feed conditions and written service cover. The Native M1 product page lists an 8 L tank and a two-year warranty offer. Urban Company’s M2 launch documentation describes app monitoring. Decide whether that feature helps your household before comparing the installed totals.

Native M1 and M2 decision
1. M1 site fit
2. M2 app features
3. Service terms
Native M1The official listing provides the tank capacity and installation pressure guidance.
Native M2The brand describes app access to TDS, filter status and water-use information. Confirm the current model offer.
ServiceSeparate warranty, filter life and what you pay at the first replacement.

Read the Native M1 water purifier listing for site fit

The M1 product page lists an 8 L tank and discusses pressure-dependent accessories. The actual installed quote depends on your inlet and connection. If your kitchen draws from an overhead tank, tell the installer when the tank level is lowest and what other taps run at the same time. The pressure when water is flowing is more relevant than the static supply figure alone.

Ask what amount is usable during a power cut and how the dispenser behaves. The listing refers to power-cut operation. Get the installer to demonstrate that feature for the installed unit. If you use 6 L in one morning burst, check whether a full tank can serve that draw and then how long it takes to recover.

Urban Company Native M1 product listing

Decide what the Native M2 water purifier app adds

Urban Company’s launch note describes the M2 as a connected purifier with app information for TDS, filter health and water use. That can help someone who wants a reminder or a record of use. An app TDS figure is a broad water-quality reading. It does not verify microbiological safety or identify a particular chemical. Use a suitable water test if you have a specific concern.

Compare the current M2 listing for the feature and app requirements, then ask whether normal dispensing and service booking work when Wi-Fi is unavailable. A household that prefers manual controls may get little value from an app. A shared household that often misses maintenance dates may value clear reminders.

Compare Native water purifier warranty and paid filter costs

Write down the exact promised duration, the parts covered, the conditions and the service channel. Record filter life separately. It can depend on the water supply and the model’s stated use limits. Ask what the first paid cartridge replacement includes and if fitting or travel is extra. Get the same information for M1 and M2 before comparing a feature premium.

Use the installed amount and the first planned paid service together. If the M2 offer includes a feature you will use, write down what that feature saves you in day-to-day time or effort. If the installation terms differ, separate that amount so you can see what you are paying for the actual upgrade.

Make the Native app trial part of the installation

If the app matters to your choice, ask who can use it and which phone is needed to register. Have one person check a useful status screen and another try normal dispensing without using the app. Keep the service contact in a place that the whole household can access. That makes the feature useful even if the person who bought the purifier is away when a service alert appears.

Test whether the M2 app changes the way you use the purifier

Imagine a household that wants a family member to receive service reminders while another person uses the purifier each day. Ask the seller to show which alerts appear on the unit, which are app-only and whether the account can be used by more than one person. Ask how to request service without the app. If the device loses Wi-Fi, compare which basic operations continue on the exact unit. A feature that is useful only to the buyer may add less value in a shared kitchen.

The M1 listing’s 8 L capacity can help with planning, but test the draw you actually need. For example, a family needs to fill three 1 L bottles and draw 2 L for cooking. That is 5 L before they account for the next drink or a lower starting level. At handover, ask how the unit shows it is ready and what can be dispensed with power off. Keep this result separate from any water-quality reading displayed on the app. A displayed TDS figure is not a full test for water safety.

Read the first paid filter bill before deciding on the upgrade

For each model, put the installed price, included accessories and written service terms in separate lines. Then ask for the exact cost of the first filter kit or service you expect to pay for. If a quote mentions cover for two years, read what water conditions, parts or use limits apply. Note when the cover begins and how to request a service visit. Similar wording on two listings does not always mean the same cover.

Use an example where one model costs ₹15,000 installed and the other costs ₹18,000 installed. If their first paid visits cost the same, the extra price is ₹3,000. If the dearer unit needs a ₹700 accessory that is already included in the lower offer, the practical difference becomes ₹3,700. Use those numbers only to see the calculation. For a real decision, check the actual model, service terms and fitting at your address.

Ask for a handover note that says what the installer measured and what they fitted. Include the unit serial number, any prefilter or pressure adjustment and where to find the shutoff. If you picked the connected model, ask the installer to show the feature that made you choose it. That is a better test of the upgrade than seeing the app icon on the box.

Native M1 versus M2 comparison

Storage and supply

M1 reference
8 L on the official M1 page
M2 reference
Use the current M2 model listing

App monitoring

M1 reference
Use the current M1 feature list
M2 reference
M2 monitoring described in the launch note

Installation

M1 reference
Confirm feed pressure and site extras
M2 reference
Request the exact model’s written install scope

Service

M1 reference
Confirm coverage and paid replacement cost
M2 reference
Use the same coverage and part-code checklist

Common questions

Do M1 and M2 offers have identical service terms?

Read the current written terms for each SKU and your location.

Does the app establish drinking-water safety?

No. Its readings have a specific scope. Use a suitable test for the substance or organism you are concerned about.

Can the quote change at installation?

Site pressure and fitting needs can affect the quote. Ask for those lines before booking.

Related guides

Sources

Back to blog