Digital Auto Switch Supplier in Kolhapur
Mohit VekariaShare
If you need a Digital Auto Switch Supplier in Kolhapur, compare VUKAR DEV-P2 for a compatible three-phase pump starter that already works. It suits a job where a clean utility-water tank must be ready before a fixed shift handover. Set the run time from the volume you need and the flow you measure. Leave time for a slower fill, and agree what stops the pump if the tank fills first.
Plan a Kolhapur MIDC water transfer
A Kolhapur water reuse study by CWAS at CEPT documents MIDC supply to Shiroli, Gokul Shirgaon and Kagal-Hatkanangale industrial areas. That is the estate supply. A workshop can store that incoming water and move it with a separate pump. Name the pump after the storage tank and confirm where the water goes. In this example, it fills a clean utility tank for a wash bay. A wash bay is a place where tools or parts are washed. The switch controls the pump after storage.
Ask the shift lead when the next crew needs the tank and when the first crew stops taking water from it. If people keep drawing water while it fills, the tank may rise more slowly. Set the time from a real test at the right outlet, or measure how fast the water level rises during normal use. This leaves a clearer record than copying the time from an old panel.

When a three-phase auto switch with clock timer fits
The VUKAR DEV-P2 product page lists clock timing, cyclic timing and motor protection for compatible three-phase pump applications. A clock timer uses a fixed time of day. A cyclic timer repeats an on-and-off pattern. Use clock timing for a stable handover time. If the shift lead moves the deadline most days, ask who will change the setting or whether a supervised start suits the job better.
Worked example · Check the margin
Suppose 600 litres must be ready at 18:40. At 30 litres per minute, a start at 18:15 finishes by 18:35. If flow falls to 24 litres per minute, the same amount takes 25 minutes and finishes at 18:40. These are example values.
| What changes | What to compare |
|---|---|
| Fixed handover time | Clock timing and a measured run |
| Handover time moves | Who sets or starts the pump |
| Full tank before time is up | Existing level stop takes priority |
A timer cannot tell whether the tank has reached its full mark. If the site has a float or another level signal, agree which one stops the run first and have the electrician prove that it still works. Tell the installer if the tank needs a low-source stop. Keep the existing protection and the required behaviour after a power cut in the quote.
Work backward for a shift handover tank refill
Write the deadline first. Divide the litres needed by the measured litres per minute to estimate the run time. Then allow time for a slower fill or a handover check. In the worked example, the next crew needs 600 litres by 18:40. At 30 litres per minute the fill needs 20 minutes. A start at 18:15 gives a five-minute margin. A slower flow can use all that margin. At the first handover, write down the water level when the pump actually starts and when it stops. Ask the next crew whether it had enough water at the deadline. If it did not, use that note to check whether the pump started late, the flow dropped or another point kept using water.
What to send for a Kolhapur auto switch quote
Send the starter label and motor plate, the fill deadline, measured flow and the starting water level. Add what stops the pump if the tank fills before the timer ends. Ask for the switch, fitting and tests as separate items. Have the electrician show what happens at the scheduled start, at the full mark and if the first shift leaves the pump in manual mode. Record who returns it to the agreed mode. Include your PIN code for the dispatch estimate.
Compare the three-phase digital auto switch models, then send the starter and handover details to VUKAR. Ask which model fits and what level controls stay in the panel.