Illustrative house roof with a gutter and nearby closed storage drum

Rainwater Harvesting: Tamil Nadu’s November Update and Rooftop Checklist

Mohit Vekaria

Start by tracing where rain from your roof goes. Route it through a screen, first flush and filter, then into a covered storage tank or a suitable recharge structure. Tamil Nadu’s reported 2 November 2026 guidelines cover building and restoring these systems. If yours already exists, check for blocked pipes, a dirty filter and an unsafe overflow.

Sources checked 8 November 2026 · Tamil Nadu update

CollectUse a covered tank if you have a plan to use the water.
RechargeChoose a site assessed for groundwater recharge.
MaintainKeep the filter accessible and check where overflow goes.

What changed in Tamil Nadu in November?

Reporting on the 2 November order says Tamil Nadu asked departments and local bodies to coordinate the construction, restoration and upkeep of rainwater harvesting systems. The reported guidance distinguishes between homes, apartments and larger premises. Annexure XXII of the published Tamil Nadu building rules already describes rainwater conservation for building plans.

If you own a home or manage a building, ask your local body which plan and inspection requirements apply to your property. Take a photo of the roof outlet, filter, tank and overflow so the installer can see the existing route.

3 November reporting on the state update · Tamil Nadu building rules, Annexure XXII

Separate illustrations of a roof gutter, mesh screen and storage lid
Follow the route from roof to outlet. Check the gutter, screen and storage before the next rain.

Follow the water from roof to outlet

  1. Roof and screen. Keep leaves and other debris from entering the downpipe.
  2. First flush and filter. Divert the initial dirty runoff. Keep the filter accessible so it can be cleaned.
  3. Storage or recharge. Route filtered water to a covered tank for planned use, or to a recharge structure suited to the site.
  4. Overflow. Check that overflow follows an approved route away from foundations. Keep the outlet clear.

Tamil Nadu Rural Development rainwater harvesting design and maintenance guidance

Storage or recharge? Choose by use

Swipe sideways on smaller screens to see more columns.

Rooftop rainwater harvesting options
Your goal What to plan First check
Use water later Covered tank, cleaning access and a safe overflow. What will you use it for between rain events?
Recharge groundwater A suitable soak pit, trench or recharge well. Ask a local professional about soil, groundwater and separation from contamination sources.
Store and recharge Tank first, with overflow routed to an approved recharge structure. Check tank capacity and whether the site can take the overflow.

How much rain can a roof collect?

100 m² × 25 mm × 0.80 = 2,000 litres

One millimetre of rain on one square metre equals one litre before losses. Here 0.80 is an illustrative collection factor. Actual yield depends on the roof, first flush and filter losses. Size storage using local rainfall, demand and available space.

Estimate your roof yield with the rainwater harvesting calculator

Three checks before the next rain

Clear the roof and screen from a safe access point. Check that the first-flush device and filter can be serviced. Have the installer trace the overflow all the way to its discharge point. During the next shower, look for leaks, standing water and overflow at an unexpected outlet.

Check the usable volume of an existing tank

Quick answers

Should I fit a pump to every rainwater harvesting system?

A gravity-fed recharge system may not need one. A pump is useful if stored water has to move to a higher tank or point of use.

Can I drink filtered rooftop rainwater?

A rooftop screen and filter alone do not make water safe to drink. Use a suitable treatment and water-quality testing plan for potable use.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.