Monitor Says Entering Power Saving Mode? Find the Lost Signal
Mohit VekariaShare
The message often means the monitor has power and is waiting for a picture from the computer. If moving the mouse wakes it, the computer was asleep. If the message comes back at startup, follow the cable and input path.
Start at the monitor menu
Press the monitor’s menu button. Choose the input that matches the socket in use, such as HDMI 1 or DisplayPort. After saving any open work, turn off both devices before reseating the video cable. Use one direct cable for the first comparison.
What appears next?
Menu appears, then No Signal
Try a known-good cable on the matching input. A working menu shows the monitor can draw its own picture.
A spare monitor also goes blank
The computer, its video port or startup is a more likely lead. Record whether the computer shows a logo.
The screen returns when you move the mouse
That is consistent with normal sleep. Windows power settings control how long the display waits before sleeping.
Why skip the dock at first?
A dock or adapter adds another point where a signal can stop. A direct cable gives a simpler comparison. If a direct connection works, add the dock back last.