3 Phase Digital Auto Switch with Motor Safety & Cyclic Timer (DEV-P1) VUKAR

Digital Auto Switch Manufacturer in Rajkot

Mohit Vekaria

Vukar Automation manufactures digital auto switches in Rajkot. If a three-phase pump already has a starter and the job is to add compatible automatic control, the VUKAR DEV-P1 is a model to ask about. It lists a cyclic timer for a repeating run/rest pattern. If the pump must run at set times of day, discuss a clock-timer model such as DEV-P2.

Keep the purchase focused on the problem

A pump operator might say, ‘The panel is fine. I’m just tired of returning to switch the pump at the same intervals.’ That is a different request from ‘The old starter has burned out and I need a complete replacement.’ Tell the manufacturer which job you have. A digital auto switch and a complete starter panel solve different parts of the installation.

At Vukar Automation, we make pump controls in Rajkot. When you send an enquiry, a photo of the installed starter and the motor nameplate helps explain the retrofit. Describe the operation in plain words. A request for a repeat run/rest cycle is clearer than a request for ‘an automatic switch with every timer’.

VUKAR product details · DEV-P1
VUKAR product details · DEV-P1

Repeat intervals and clock times are different

The DEV-P1 listing identifies a three-phase digital auto switch with a cyclic timer. A cyclic timer follows a run/rest pattern. If your requirement is to run at a particular hour on a clock, the relevant comparison is with the clock and cyclic timer functions listed for DEV-P2. Decide which job the switch should do before you choose a model.

For a site that uses the same pump in several shifts, ask the person who operates it what they actually do today. They may need a cycle that repeats while the system is enabled, or they may need start times tied to the day. Those are two different buying instructions. If the facility also requires tank-level sensing, describe that separately so the team can discuss the correct controller.

Describe the job before choosing a switch
Application What to ask for
Repeat the same run/rest cycle Discuss DEV-P1 for a compatible three-phase setup
Run at chosen times of day Compare the DEV-P2 clock-timer listing
Replace the complete starter Ask for a starter-panel quote

Ask for a retrofit quote by model

For a one-off retrofit, tell the sales team the supply phase, existing starter arrangement and desired timer behaviour. A qualified electrician should confirm the match and the electrical settings. For a dealer enquiry, group the units by phase and timer requirement. Put ‘cyclic’ and ‘clock schedule’ on separate lines when the work calls for both.

Ask for the product model and the job it covers in the quotation. This makes it easier to decide which units can use DEV-P1 and which need another model. If a customer actually needs a new starter enclosure, move that request into the panel enquiry so the comparison includes the complete equipment.

An enquiry for an existing panel works best when the goal is stated in ordinary words. For example, tell us that the operator wants the same pattern to repeat while the system is enabled, or that the staff work to a daily timetable. The sales team can discuss the right timer family from that description. An electrician who knows the existing panel can then confirm how the chosen device fits into the installation.

For a mixed dealer order, write down the jobs rather than treating every digital auto switch as interchangeable. One request may call for three-phase cyclic control, another for a daily clock schedule, and another for a new starter panel. A clear quote lets the receiving team match the correct model to each of those needs. It also gives the buyer a usable record for a future spare or repeat order.

Example enquiry

“We have a three-phase pump with an existing starter. It needs repeated run/rest control. Please confirm whether DEV-P1 fits. Panel and motor photos attached.”

Ask about a digital auto switch retrofit

Buying questions

Does DEV-P1 have a clock scheduler?

The DEV-P1 product is listed with a cyclic timer. Compare DEV-P2 if the requirement is a clock schedule.

Can I fit a digital auto switch to every starter?

Ask the manufacturer and your electrician to confirm the phase, existing starter arrangement and the intended control function.

References

Back to blog