Borewell Starter Panel Supplier in Greater Noida
Mohit VekariaShare
If you need a Borewell Starter Panel Supplier in Greater Noida, SubmersibleShop.com offers VUKAR BOM-T for a compatible single-phase borewell or openwell pump that needs scheduled running. If you also want to record water use, ask for a separate water meter at the correct outlet. The starter's clock can set a run time. It cannot measure the litres delivered during that time.
Keep borewell runtime and water volume separate
The Uttar Pradesh Jal Jeevan Mission dashboard for Gautam Buddha Nagar lists pump running hours and water production in separate fields for local water schemes. That distinction can help a caretaker plan an existing borewell job in Greater Noida. The public dashboard does not describe your building. Set up a separate place to record when your pump ran and what the meter showed on the same water route.
Give the installer a sketch of the borewell pipe, any other inlet and the tank. If two inlets join before the meter, the reading can include water from both sources. Tell the installer whether you want the volume from the borewell alone or the total entering the tank. Choose the meter point for that purpose. Show which valves can change the water route during a run.

When a single-phase borewell clock timer fits
The VUKAR BOM-T product page lists a single-phase starter panel with motor protection, a cyclic timer and a clock timer. A clock timer sets a run for a time of day. A cyclic timer repeats an on time and a rest time. Compare the exact variant with your motor label and starting setup. Ask who will test the agreed schedule after a power cut. If tank level must stop the pump, ask for that function and its matching sensor separately.
Worked example · One 12-minute run
Assume the meter reads 1.24 cubic metres before a 12-minute run and 1.54 after it. The difference is 0.30 cubic metres, or 300 litres. A 12-minute setting on another day does not guarantee the same volume. Take a new reading if the amount matters.
| Question | What to specify |
|---|---|
| When should the pump run? | Clock schedule and restart test |
| How much water came from the borewell? | Meter point and starting and ending readings |
| When should a full tank stop the run? | A level stop and the sensor that provides it |
Ask for the measured flow only after agreeing which pipe to measure. A ten-minute run can send a different amount of water on another day if the flow changes. The meter reading can show the difference. Leave the time schedule in the starter and keep the meter reading in the log. If the meter moves while the borewell pump is off, check which other route could be feeding the same pipe before changing the timer. Keep the date, the pump ID and the meter ID on the same line. If someone draws water from a shared pipe during the test, make a note and repeat the test with the intended route.
Quote a separate borewell water meter
Ask the installer to list the water meter as its own item. Confirm the pipe size, intended flow range, units shown and how the caretaker will read it. If the meter reads cubic metres, one cubic metre equals 1,000 litres. Use the same units throughout the log. If the site needs a formal water-use record, check the site requirements before ordering so the meter and record suit that purpose.
What goes in a Greater Noida borewell starter quote
Send the motor plate, supply phase, running current, old starter model and the proposed schedule. Include a drawing showing what the meter should measure. Ask the quote to separate the starter, meter, pipe changes, fitting and tests. At handover, ask for one run with a start and end reading. Write the pump ID beside the meter ID so the next person can match the two records. Leave a photo of the normal valve positions with the handover log. Ask the person who will run the pump to show you where the meter is and how they will take the next reading. If the first operator is away, the next person should be able to repeat the test.
See the single-phase borewell starter comparison, then send VUKAR the motor and water route details. Ask for the starter and meter scope in separate lines.