Single Phase Borewell Automatic Water Level Controller, Motor Safety, Cyclic Timer & Single Float Switch (DEV-H1) VUKAR

Automatic Water Level Controller Manufacturer in Rajkot

Mohit Vekaria

If your overhead tank overflows because someone forgets the pump, start with the tank layout. Vukar Automation manufactures automatic water level controllers in Rajkot. Its VUKAR DEV-H1 is a single-phase borewell option with one float-switch input. If the pump draws from a sump and fills a roof tank, ask us about the matching two-float model instead.

What are you trying to stop?

A buyer often calls the sales team with a simple problem: someone has to wait for the tank to fill and switch the motor off. If it is a borewell feeding one overhead tank, the float in that tank tells a compatible controller when the water reaches the set points. If the pump moves water from a sump to an overhead tank, the buyer also needs to account for water being available in the sump. Those two layouts can look similar from the terrace but lead to different product choices.

This distinction helps when you ask a Rajkot manufacturer for a quote. Say what the pump draws from and where the water goes. Those two details tell us more than a message that just says ‘send a water controller’. A quick picture of the tank layout can help when several people handle the same purchase.

VUKAR product details · DEV-H1
VUKAR product details · DEV-H1

Which VUKAR model should you ask about?

The VUKAR controller family separates single-phase and three-phase pump applications. DEV-H1 and DEV-G1 are the listed single-float borewell options. DEV-H2 and DEV-G2 are the listed double-float choices for openwell or monoblock pumps. The exact model page gives the applicable setup. An electrician can confirm the pump and existing panel arrangement before installation.

Suppose a house has a single-phase borewell pump that fills one roof tank. DEV-H1 is the catalogue model to discuss. If the house later adds a ground-level storage sump and uses a monoblock pump to transfer that water, the setup changes. Ask about DEV-H2 instead of ordering the old controller again. The product decision follows the water path, even when the home and delivery address are the same.

From tank layout to model enquiry
Application What to ask for
Single-phase borewell to one overhead tank DEV-H1 · one float-switch arrangement
Single-phase openwell or monoblock from a sump DEV-H2 · two-float arrangement
Three-phase pump Ask for the corresponding DEV-G option

Buy direct from Rajkot

Vukar Automation lists its manufacturing base and enquiry channels on the Rajkot company page. Tell our sales team whether you are ordering for one home, replacing an existing device or comparing a set of installations. A photo of the existing controller label is useful for a replacement. When the job includes a new panel as well, say so in the first message so the quote reflects the intended package.

Ask for the exact model and the float-switch items in the quotation. A price for just the control device and a price for a different package are difficult to compare. For several installations, put each pump type and tank layout on its own line. This helps the receiving team send the correct device to the correct building.

One reason to buy from the manufacturer is to get a clear answer when only one part of the arrangement has changed. If an existing controller remains in service and the job involves a replacement float switch, describe that as a spare enquiry and share the old model code. If the whole controller is being replaced, ask which items are supplied with the new unit. These are different orders. Putting the reason for the purchase in the first message makes it easier for the sales team to quote what is actually needed.

For a contractor, the practical question is what will arrive for each installation. Ask for the model and included sensing items to be listed against each job, especially when a single-float borewell and a double-float transfer pump are in the same order. The team that receives the cartons can check the codes before dispatching material to site. If you are buying just one controller, the model-specific page is a faster way to see the current option before you make an enquiry.

Example enquiry

“Single-phase borewell pump filling one overhead tank. Please quote DEV-H1 and confirm the included items. Delivery PIN: [your PIN].”

Ask VUKAR about your tank layout

Buying questions

Do I need two float switches for one overhead tank?

In the listed single-float borewell arrangement, the overhead tank is the sensing point. If the pump draws from a separate sump, ask which two-float arrangement fits.

Can I add the controller to an existing panel?

Share the panel and motor details. The manufacturer and your electrician can confirm whether the controller suits the existing arrangement.

References

Back to blog