How to Split an Electricity Bill Using Sub-Meter Readings
Mohit VekariaShare
To split an electricity bill using sub-meter readings, subtract each room’s previous reading from its current reading. That gives you the units the room used. Multiply those units by the rate you agreed to use, then add the room’s share of common electricity and fixed charges. In the example below, a room that used 80 units owes ₹920 on a ₹3,000 building bill.
This method is for a building with one electricity company bill and separate meters for rooms, flats or shops. The main meter records the building’s total. A sub-meter records the electricity used on the circuits connected to it. A corridor light or shared pump may be on a different circuit, so its use can appear only on the main meter.
Read each meter on the same dates
Start with the billing period on the electricity company’s bill. Find the previous and current meter readings for each room, taken as close to those dates as possible. A photo with the date helps if a tenant asks how you got the number. Record all the digits the same way each month and use the cumulative reading marked kWh. One kWh is one unit of electricity.

If a room’s meter shows 1,240 kWh at the start and 1,320 kWh at the end, the room used 80 units. Do the same for each room and keep both readings in your record. If the display cycles through several screens, match the kWh label before copying the number. On a digital meter, the voltage or current screen can look just as official as the energy screen.
For the main meter, use the bill’s stated units consumed for the period. If the utility used an estimated reading, record that alongside your calculation. Keep the estimate visible so everyone can follow a later correction. The Tamil Nadu electricity utility’s billing page explains how its bills and tariff information are made available.
Set up a monthly sheet with columns for room, start date, previous reading, end date, current reading and units. Put the main meter’s units above the room rows. If your building has a separate meter for the lift or pump, enter that reading on its own line. You can then compare measured common usage with the gap between the main meter and the room totals. That one extra line helps distinguish a shared load from a missing reading.
Split a ₹3,000 electricity bill across three rooms
Suppose the building used 300 units. The current bill includes ₹2,400 in usage-linked charges and ₹600 in fixed charges. Room A used 80 units, Room B used 110 and Room C used 80. Their meters add up to 270 units. In this example, the remaining 30 units belong to common equipment and the readings cover the same dates.

First, calculate the effective usage rate. Divide ₹2,400 by 300 units. That gives ₹8 per unit for this bill. If your utility uses slabs, this is the blended rate for splitting the building’s usage charges. Look at the separate fixed and energy charge tables in the PGVCL tariff order for an example of how a utility separates those charges.
Then, split the shared costs. The common equipment used 30 units, which cost ₹240 at ₹8 per unit. If everyone agreed to an equal split, each of the three rooms pays ₹80 toward common usage and ₹200 toward fixed charges.
| Room | Own units | Usage | Shared + fixed | Total |
|---|---|---|---|---|
| A | 80 | ₹640 | ₹280 | ₹920 |
| B | 110 | ₹880 | ₹280 | ₹1,160 |
| C | 80 | ₹640 | ₹280 | ₹920 |
| Total | 270 | ₹2,160 | ₹840 | ₹3,000 |
Room A pays ₹920. That is ₹640 for its own electricity, ₹80 for the shared equipment and ₹200 toward fixed charges. Add all three room totals at the end. They should match the ₹3,000 you set out to split.

Two ways to calculate the rate per unit
If your bill shows usage and fixed charges separately, use the method above. It helps when one room uses much more electricity than another and everyone has agreed to share the basic supply cost evenly. It also makes it easier to explain what changed when a room’s usage goes up.
You can also divide the whole current-period bill by the main meter units and use one blended rate. In the example, ₹3,000 ÷ 300 gives ₹10 per unit. Room A’s 80 units cost ₹800. Add ₹100 for its equal share of the 30 common units and the room pays ₹900. Under this method, the ₹10 rate already includes fixed charges. Charging another ₹200 would count them twice.
Choose one rule before sharing the bill. Keep old arrears, deposits and previous late fees on separate lines so they can go to the person or period they belong to. If the bill has a credit or adjustment, read its description before assigning it to the rooms. Use the electricity bill calculator if you need to work out units or estimate an appliance’s running cost separately.
Some buildings use a single flat rate agreed in advance. If you use one, keep the rate and the charges it covers in writing. Compare the sum of room payments with the current bill to see what is left for the owner or building account to pay. For example, three rooms using 270 units at ₹8 contribute ₹2,160 before any common or fixed share. The remaining ₹840 needs a clear allocation under the building’s arrangement.
What if the sub-meters don’t add up?
Compare the dates first. If the main bill ends on the 26th and you read the rooms on the 30th, the totals cover different periods. Move the room reading day closer to the next utility meter date. If a meter was replaced mid-month, record the old meter’s final reading and the new meter’s starting reading. Calculate both portions and add them.
When the main meter shows more units than the rooms combined, list any loads that bypass the room meters. Think of stair lights, a gate motor, a water pump or a shared socket. Use the agreed split for known shared loads. If you have yet to account for a big gap, record it as an unexplained difference until you know where it came from. Ask a qualified electrician to trace circuits or inspect the meters if the difference keeps returning.
If the room totals exceed the main bill units, revisit the billing dates, the meter displays and any estimated main reading. Check whether one sub-meter includes a circuit that another meter also records. A negative common-usage figure signals a mismatch that needs investigating. Hold that line out of the split until the readings can be reconciled.

Round each room’s final share to the precision you use for payments. If rounding leaves a small balance, show it on a separate line. An equal split of ₹100 across three rooms, for example, can be ₹33.33, ₹33.33 and ₹33.34. Record the same total in the shared sheet and the three individual messages.
When someone moves in halfway through the month
Take a reading on the handover day. If the meter starts at 1,240, reads 1,290 on handover and finishes the bill period at 1,320, the outgoing tenant used 50 units and the incoming tenant used 30. At ₹8 per unit, their usage amounts are ₹400 and ₹240. Split the room’s fixed and common share using the occupancy rule you agreed to, such as days in the room.
Keep a simple line for vacant rooms, too. A room can show zero usage and still have a share of fixed charges under the building’s rule. Write down who covers that share before sending the bill. For the next handover, take one photo both people can refer to.
When the utility issues a correction after someone moves out, keep a copy of the original breakdown. Add the new adjustment with the affected billing dates so it can be traced to the right room and occupant. This is much easier when the move-out photo and the main bill are saved together.
Send a bill breakdown people can check
A WhatsApp message should give the dates, readings, rate and the shared charges. Use one message per room so tenants can see their calculation without receiving everyone else’s details. This example uses Room A’s share from the ₹3,000 bill.
Room A electricity share · 1–30 June
Meter readings 1,240 → 1,320 kWh
80 units × ₹8 = ₹640
Common electricity ₹80 · Fixed charges ₹200
Amount due ₹920
On the next reading day, save the main bill and room meter photos together. Keep that day’s final readings as the next period’s starting readings, so the next split begins with numbers everyone already has.