Exhaust Fan Size for a Bathroom, Utility Room or Workshop
Mohit VekariaShare
Choose an exhaust fan by the opening size and the air it needs to move. A 150 mm blade does not tell you the hole size. A fan that blows straight outside and a fan that pushes air through a long duct face different loads.
Match the opening and the air path
Measure the clear hole and the flat space around it. The grille has to cover the opening. The maker’s mounting drawing gives the hole size. Air should leave outdoors. Give replacement air a path in, such as a door gap.
| Model | Size or scope |
|---|---|
| Havells Accelero DX · FHVACDXWHT06 | 150 mm · 300 m³/h |
| Havells Accelero DX · FHVACDXWHT08 | 200 mm · 600 m³/h |
Estimate airflow for a room
The numbers below are an example. Use your own measurements or quote.
The starting value of 8 is a worked example. The suitable target depends on the room and use.
What changes in a workshop?
A wall fan can move general room air. Cutting dust or fumes need a system that catches them at the source. A long duct, bends and a flap add resistance. A qualified installer can size a fan for that route and place it safely away from wet areas.