Large closed water tank on a concrete pad near a farm pump house.

Price of a 5,000 Litre Water Tank in India

Mohit Vekaria

A black 5,000 L Sintex CCWS-500.02 was listed at ₹45,741 including tax on 10 November 2026 and was available on request. For a farm, building or workshop, put freight, unloading, base work and plumbing on the same quote before comparing suppliers.

5,000 L project price

The tank price is one line in the job

  • ₹45,741Price of the listed tank, including tax.
  • About 1.97 m × 1.97 mListed diameter and height. Use the exact drawing for access.
  • About 5 tonnesWater alone at nominal capacity. Include the full installed load in site planning.

Moglix 5,000 L listing

Walk the delivery route before you book

An empty tank can still be too large to pass a gate or get under a low service cable. A small farm may have enough room near the pump house but no firm path for a delivery vehicle after rain. At a building site, other materials can block the planned unloading spot. Take a few photos from the road to the base and share them with the supplier before the truck is booked.

Use the exact manufacturer drawing for clearance and the installer’s handling instructions. Ask who arranges unloading and what happens if the delivery team cannot reach the agreed point. Keep people clear while the tank is handled.

Work out what the water will do

A farm may want a buffer between borewell pumping and irrigation demand. A small building may want enough reserve for a late tanker. A workshop might need storage for routine washdown. Estimate the peak use during the period you expect to go without a refill and decide how much emergency reserve is genuinely useful.

For example, at a steady 50 L per minute, a full 5,000 L refill from empty would take 100 minutes if there is no draw at the same time. A normal refill may use less. If you get a one-hour supply window at that flow, only about 3,000 L can enter during the window. Check whether the source can replace what the site uses.

Practical example

Check whether the source can catch up

Suppose your site uses 3,500 L between refills and the inlet supplies 50 L per minute for just one hour. Only 3,000 L returns. That leaves a 500 L shortfall each cycle at the same demand. A bigger tank can buy time, but the gap returns unless the site gets more refill time or reduces use. Measure the flow and supply window before buying extra storage.

Put every cost in the quote

Ask for the tank, freight, unloading, base, plumbing, valves and removal of any old tank as separate items. Include an accessible drain and a safe overflow route. If the tank is for drinking-water storage, confirm suitability for that use and how it will be cleaned and protected.

A full tank holds about five tonnes of water before fittings and the tank itself. Have a qualified person check the support and the proposed position. Follow the maker’s support details for the exact tank. A ground-level installation can still need proper site preparation.

Ask the installer to mark the drain and isolation valve at handover. On a farm or a building site, the next person may be new to the pipe layout. A simple label helps them stop the water where they need to during a leak or routine service.

Send a delivery plan with the quote request

Mark the gate, turn, unloading point and final base on a site photo or sketch. Put the person arranging lifting on the quote so delivery and installation teams agree on who does what.

If you are considering several smaller tanks, ask what can stay in use when one is isolated. Multiple tanks add valves, connections and cleaning work. Compare that with the access and downtime of one large tank. Use the capacity and fill-time calculator with your normal fill and draw figures as you plan the supply. If the tank is for a pumped refill, the tank filling electricity guide shows how running time and measured input power affect the cost.

Sources

ब्लॉग पर वापस जाएं