A cylindrical water tank on a delivery vehicle outside an Indian home.

Price of a 1,000 Litre Water Tank in India

Mohit Vekaria

Two 1,000 L water tanks were listed at ₹10,302 and ₹12,551 when checked on 10 November 2026. The first was a Plasto Ruf-Tuf model. The second was a Sintex black double-layer model. Use the figures as model-specific tank prices and compare freight, lifting and plumbing before you order.

Price comparison

Compare the tank, the route and the pipework

  • ₹10,302Plasto three-layer white Ruf-Tuf listing.
  • ₹12,551Sintex black double layer CCWS-100.01, including tax.
  • About 1 tonneWater alone in a full 1,000 L tank. Confirm the support.

Plasto listings · Sintex listing

The examples come from the Moglix Plasto listings and the Sintex CCWS-100.01 listing. A figure shown on a product or category page may change before a dealer confirms the order. Compare the final quote with the same delivery and installation scope.

How big is 1,000 litres in feet?

1,000 L is one cubic metre, or about 35.3 cubic feet of water. That number tells you volume. The actual outside dimensions depend on the shape, lid and ribs. The retailer lists a 1,105 mm diameter, about 3.63 ft, for the black Sintex example. Use the manufacturer’s drawing for the exact height and overall clearance.

A family replacing an old terrace tank may be able to reuse some pipe runs if the new fittings line up. If the outlet is higher or on a different side, the plumber may need to rework the connection. Compare the position of the fittings and get that work in the quote before choosing on price.

Practical example

Two prices for the same roof

Say the ₹10,302 model needs ₹2,000 for lifting and ₹1,500 for pipe changes. Its illustrative installed total is ₹13,802. If the ₹12,551 model needs ₹1,000 for delivery and lifting combined and can reuse the fittings safely, its total is ₹13,551. The amounts are examples. The comparison shows which lines to request from your own sellers.

Where the rest of the bill comes from

Ask for a line-by-line price for delivery to your door, lifting to the roof, plumbing labour, valves and removal of the old tank. If the existing platform needs an upgrade, keep that cost separate. Give both dealers the same site photos and destination so the comparison is fair.

A lower price can be a good deal when it includes what you need and the exact model fits. If you expect to keep the tank for years, find out whether the shop can supply a compatible lid and where it directs a warranty claim. A clear invoice with the model code will help with both.

Does your home need the full 1,000 L?

Suppose the family uses 650 L from one municipal supply window to the next and wants 150 L in reserve. That is an 800 L working target. Check how much water the tank actually delivers between its normal stop level and the outlet height. The full tank adds about a tonne of water load. Have the support checked before installing it.

Check the paperwork at delivery

Take a photo of the model label before the plumber starts. Make sure the lid and any parts named in the quote are present. If you find a crack or a damaged fitting, note it with the supplier before installation so everyone is working from the same record.

Keep the comparison fair

Give both dealers the same pincode, access photos, delivery point and plumbing scope. Compare the exact model codes on the quote and invoice.

If the model is in stock, take its measurements and the inlet flow to the water tank calculator. If you are specifically comparing the black ISI Double Layer, Hero or Pure ranges, use the Sintex 1,000 L model guide for the differences between them.

Sources

ब्लॉग पर वापस जाएं