DM-SP-LLC-96 Single Phase Motor Protection & Water Level Control

DM-SP-LLC-96 single phase motor protection device is designed for pump control circuits that need motor protection with automatic water-level control. It monitors voltage/current and stops the motor-control output when configured electrical faults are detected.

When should you choose this model?

Choose DM-SP-LLC-96 when you need automatic pump control by tank level plus repeated ON/OFF cyclic scheduling. Confirm the phase, wiring, control circuit and motor rating before installation.

Core functions

• Voltage/current monitoring and fault indication
• Overvoltage, undervoltage, overload and dry-run protection
• Cyclic Timer, Auto-Off Stop Timer and power-on start delay
• Fault counter, total run-time counter and automatic/manual modes
• Automatic water-level control and indication through connected level inputs

Installation and setup

• Install with a compatible pump starter or contactor control circuit.
• Use a qualified electrician to verify wiring, earthing and the motor rating.
• Set voltage, current, dry-run and timer parameters for the connected pump.
• Water-level operation depends on correct level-input wiring and sensor placement.
• After a trip, identify and correct the fault before restart.

Warranty, dispatch and support

• 1-year product warranty when purchased from this website.
• Orders are dispatched within 0–1 working day; expected delivery is 1–5 working days from the order date across India.
• Free shipping across India.
• Technical support by WhatsApp or call: +91 63588 96254.

Compare before buying

• Compare motor protection devices and digital meters
• Compare single phase starter panels
• View the VUKAR model and price comparison

Product feature guide

Dual digital display

Shows single phase voltage and current during operation.

Fault indication

Displays detected motor faults to support troubleshooting.

Motor fault counter

Records the number of motor-fault events.

Motor run-time counter

Records cumulative motor running time for maintenance reference.

Motor status indication

Shows motor ON and fault status.

Automatic water-level control

Uses connected level inputs to start and stop the pump according to tank level.

Water-level indication

Shows the detected tank-level status.

Voltage protection

Stops the control output when voltage moves outside configured limits.

Overload and dry-run protection

Stops the motor-control output during configured overload or dry-run conditions.

Overload safety lockout

Keeps the control output stopped after an overload until reset.

Auto-off stop timer

Stops the pump after the configured running duration.

Power-on start delay

Adds a configured delay before restart after power returns.

Built-in auto switch

Provides automatic control when the configured supply conditions are healthy.

Cyclic timer

Runs repeated ON/OFF cycles according to configured timings.

Starting-torque timing

Controls the configured starting sequence on supported single phase installations.

Dry-run restart timer

Retries after the configured recovery delay following a dry-run stop.

Timer power-failure recovery

Restores the configured timer cycle after a power interruption.

Digital registration and operating modes

Supports digital product registration and automatic/manual operation modes.

Technical support

WhatsApp and call support is available at +91 63588 96254.

Frequently asked questions

Is this a complete motor starter?

This is a Motor Protection Device. Install it with a compatible starter or contactor control circuit.

Are the same settings suitable for every pump?

No. A qualified electrician should set the parameters for the motor nameplate, supply and installation.

Is level-sensor wiring required?

Yes. Automatic water-level control requires compatible level inputs and correct sensor placement.