MOM-H product videos
Watch the panel named in the video, then check the exact product specifications and motor variant.
MOM-H hardware overview
English captions · 12.75 seconds · No spoken audio
Read the video text
MOM-H: front panel. Timed operation where automatic tank-level control is not required.
MOM-H: panel interior. An inbuilt MCB is visible beside the terminal block.
Before choosing MOM-H
Choose this model for motor protection and timed operation where automatic tank-level control is not required. MOM-H adds an MCB to the Cyclic Timer and Auto Switch package.
Questions before choosing
What makes MOM-H different?
MOM-H keeps the Cyclic Timer and Auto Switch controls of the base MOM model and adds an inbuilt MCB for panel-circuit protection. It does not include Clock Timer scheduling, Water Level Indicator or automatic Water Level Controller. Choose it when short-circuit protection at the panel is required but tank-level automation is handled separately.
Which pump variant should I choose?
Match the selected variant to the pump nameplate. Before ordering, confirm the power supply, full-load current, cable size and starter settings with a qualified electrician.
Questions before choosing
Which pump installation is MOM-H a good fit for?
MOM-H is designed for a compatible single phase monoblock (Tullu) installation and combines cyclic timing, an auto switch and an inbuilt MCB with motor protection. This makes its function package easy to match to the way you want the pump to operate. Start with the pump type and supply, then select the motor-rating option from the product details.
How do I select the right MOM-H motor-rating option?
The listed MOM-H range is 0.5–3 HP, with the individual option selected for the motor nameplate. Matching HP, operating current and the single phase supply gives the installer the right basis for wiring and protection setup. Use your motor details alongside the product options when choosing the variant.
How can I use MOM-H for repeated pump runs?
MOM-H’s Cyclic Timer repeats configured ON and OFF periods. This gives a repeating run/rest pattern for the monoblock (Tullu) pumping plan. Choose the intervals for the motor and actual water-source conditions, then configure them using the timer guidance.
How does MOM-H’s power-on delay fit into the timer setup?
MOM-H’s power-on start delay provides a configured wait before starting after supply returns. The run or cyclic settings then determine the subsequent timed operation. Set the start delay and operating pattern separately for the connected pump, with electrical protection configured for the supply conditions.
What does the inbuilt MCB add to MOM-H?
MOM-H includes an inbuilt MCB for short-circuit protection of the panel circuit. This complements the configured overload, dry-run and voltage functions in its motor-protection package. Have the electrician check the breaker, wiring and motor settings together as part of the complete installation.
When is MOM-H the right choice for timed pumping?
MOM-H is suited to time-based pump operation where tank level is managed separately. Its timer provides the selected operating pattern, while the receiving tank remains a separate part of the pumping plan. If you want the pump to respond automatically to tank demand, compare the corresponding water-level-control options.
How is MOM-H’s motor protection tailored to my pump?
MOM-H uses configured overload, dry-run and voltage limits for the connected motor. Matching those values to the nameplate, supply and observed operation makes protection setup specific to your installation. Have a qualified electrician set and check the values using the exact model instructions.
How can I use MOM-H’s saved running hours for maintenance?
MOM-H’s total running hours remain saved across days and power cuts. Recording the reading at service visits lets you calculate operating hours between valid readings for the same motor and counter. Keep the model, date and work done in the service record, and use the pump manufacturer’s maintenance guidance when planning the next visit.
How do I choose between MOM-H and MOM-T?
MOM-H offers cyclic timing, an auto switch and an inbuilt MCB, while MOM-T offers clock and cyclic timing. Compare those functions with the timed-operation, tank-filling or MCB requirement at your site. Open the related model details and match the pump application, supply and motor variant before making the choice.
What makes a good MOM-H installation and handover?
Have a qualified electrician match the single phase supply, motor rating and model wiring to the selected MOM-H variant. Set and test the timed operating pattern for the actual pump and water source. Keep the supplied diagram and agreed settings with the panel so future operation and service start from the correct model information.