MOM-C product videos
MOM-C Single Phase Monoblock (Tullu) Pump Starter Panel with Cyclic Timer is designed for 0.5–3 HP single phase monoblock (Tullu) pump variants. It combines pump operation controls with dry-run, overload and voltage protection.
MOM-C hardware overview
English captions · 50 seconds · No spoken audio
Read the video text
MOM-C: panel controls and display. Timer functions and protection settings depend on the selected panel.
MOM-C: panel and enclosure view. Match the panel version, motor rating and supply.
MOM-C: control interface example. Use the supplied model guide for installation and settings.
Before choosing MOM-C
Choose this model for motor protection and timed operation where automatic tank-level control is not required. MOM-C is the base Cyclic Timer and Auto Switch model without MCB, Clock Timer or tank-level control.
Questions before choosing
Which pump installation is MOM-C a good fit for?
MOM-C is designed for a compatible single phase monoblock (Tullu) installation and combines cyclic timing and an auto switch with motor protection. This makes its function package easy to match to the way you want the pump to operate. Start with the pump type and supply, then select the motor-rating option from the product details.
How do I select the right MOM-C motor-rating option?
The listed MOM-C range is 0.5–3 HP, with the individual option selected for the motor nameplate. Matching HP, operating current and the single phase supply gives the installer the right basis for wiring and protection setup. Use your motor details alongside the product options when choosing the variant.
How can I use MOM-C for repeated pump runs?
MOM-C’s Cyclic Timer repeats configured ON and OFF periods. This gives a repeating run/rest pattern for the monoblock (Tullu) pumping plan. Choose the intervals for the motor and actual water-source conditions, then configure them using the timer guidance.
How does MOM-C’s Auto Switch help operate the pump?
MOM-C’s auto-switch function supports automatic operation when the configured supply and operating conditions permit it. Together with cyclic timing, this provides automatic switching and a repeated run/rest pattern. Choose the operating mode and power-return settings for your site during setup.
How does MOM-C’s power-on delay fit into the timer setup?
MOM-C’s power-on start delay provides a configured wait before starting after supply returns. The run or cyclic settings then determine the subsequent timed operation. Set the start delay and operating pattern separately for the connected pump, with electrical protection configured for the supply conditions.
When is MOM-C the right choice for timed pumping?
MOM-C is suited to time-based pump operation where tank level is managed separately. Its timer provides the selected operating pattern, while the receiving tank remains a separate part of the pumping plan. If you want the pump to respond automatically to tank demand, compare the corresponding water-level-control options.
How do I choose between MOM-C and MOM-H?
MOM-C offers cyclic timing and an auto switch, while MOM-H offers cyclic timing, an auto switch and an inbuilt MCB. Compare those functions with the timed-operation, tank-filling or MCB requirement at your site. Open the related model details and match the pump application, supply and motor variant before making the choice.
How can I use MOM-C’s saved running hours for maintenance?
MOM-C’s total running hours remain saved across days and power cuts. Recording the reading at service visits lets you calculate operating hours between valid readings for the same motor and counter. Keep the model, date and work done in the service record, and use the pump manufacturer’s maintenance guidance when planning the next visit.
How can MOM-C’s display help with operation and support?
MOM-C displays electrical readings, timer information and fault indications. Those details help you describe the pump’s operating state clearly when discussing a setting or a stop. Record the model and displayed values, then use the fault guide to identify the next check or share the information when requesting help.
What makes a good MOM-C installation and handover?
Have a qualified electrician match the single phase supply, motor rating and model wiring to the selected MOM-C variant. Set and test the timed operating pattern for the actual pump and water source. Keep the supplied diagram and agreed settings with the panel so future operation and service start from the correct model information.