DM-TP-LLC-96 Three Phase Motor Protection & Water Level Control

DM-TP-LLC-96 three phase motor protection device is designed for pump control circuits that need motor protection with automatic water-level control. It monitors voltage/current and stops the motor-control output when configured electrical faults are detected.

When should you choose this model?

Choose DM-TP-LLC-96 when you need automatic pump control by tank level plus repeated ON/OFF cyclic scheduling. Confirm the phase, wiring, control circuit and motor rating before installation.

Core functions

• Voltage/current monitoring and fault indication
• Overvoltage, undervoltage, overload and dry-run protection
• Phase-loss and phase-sequence detection
• Cyclic Timer, Auto-Off Stop Timer and power-on start delay
• Fault counter, total run-time counter and automatic/manual modes
• Automatic water-level control and indication through connected level inputs

Installation and setup

• Install with a compatible pump starter or contactor control circuit.
• Use a qualified electrician to verify wiring, earthing and the motor rating.
• Set voltage, current, dry-run and timer parameters for the connected pump.
• Water-level operation depends on correct level-input wiring and sensor placement.
• After a trip, identify and correct the fault before restart.

Warranty, dispatch and support

• 1-year product warranty when purchased from this website.
• Orders are dispatched within 0–1 working day; expected delivery is 1–5 working days from the order date across India.
• Free shipping across India.
• Technical support by WhatsApp or call: +91 63588 96254.

Compare before buying

• Compare motor protection devices and digital meters
• Compare three phase starter panels
• View the VUKAR model and price comparison

Product feature guide

Fault indication

Displays detected motor faults to support troubleshooting.

Motor fault counter

Records the number of motor-fault events.

Motor run-time counter

Records cumulative motor running time for maintenance reference.

Motor status indication

Shows motor ON and fault status.

Automatic water-level control

Uses connected level inputs to start and stop the pump according to tank level.

Water-level indication

Shows the detected tank-level status.

Digital clock display

Shows clock and schedule information on models with clock timing.

Voltage protection

Stops the control output when voltage moves outside configured limits.

Overload and dry-run protection

Stops the motor-control output during configured overload or dry-run conditions.

Phase-fault protection

Detects phase loss and incorrect phase sequence on three phase models.

Overload safety lockout

Keeps the control output stopped after an overload until reset.

Auto-off stop timer

Stops the pump after the configured running duration.

Power-on start delay

Adds a configured delay before restart after power returns.

Built-in auto switch

Provides automatic control when the configured supply conditions are healthy.

Cyclic timer

Runs repeated ON/OFF cycles according to configured timings.

Dry-run restart timer

Retries after the configured recovery delay following a dry-run stop.

Timer power-failure recovery

Restores the configured timer cycle after a power interruption.

Digital registration and operating modes

Supports digital product registration and automatic/manual operation modes.

Dual digital display

Shows three phase electrical readings for operating checks.

Frequently asked questions

Is this a complete motor starter?

This is a Motor Protection Device. Install it with a compatible starter or contactor control circuit.

Are the same settings suitable for every pump?

No. A qualified electrician should set the parameters for the motor nameplate, supply and installation.

Is level-sensor wiring required?

Yes. Automatic water-level control requires compatible level inputs and correct sensor placement.