Closed underground sump inspection cover in an Indian home courtyard.

Underground Water Tanks for Homes and Buildings

Mohit Vekaria

Use a burial-rated plastic tank or a site-designed reinforced concrete sump for underground storage. The right choice depends on groundwater, soil, loads above the tank and access for cleaning. Plan the delivery inlet, drain and pump protection while those details are still easy to change.

Underground storage

Choose the tank and the site together

  • Burial-rated plasticUse the exact installation limits for bedding, backfill and groundwater.
  • Reinforced concrete sumpHave the structure, joints, waterproofing and access designed for the site.
  • Rain and service accessPlan for high groundwater, safe access covers and what can pass above the tank.

Work out why you need storage below ground

A home with no room on the terrace may need a place to receive municipal or tanker water. A building may want a ground-level fill point with a pump that sends water upstairs. In both cases, estimate the water used between deliveries, the flow at which the tank can refill and the space required for the pump and service access.

The Sintex underground sump range is an example of a plastic product designed for underground installation. Use the drawing and installation requirements for the model you buy. A regular overhead tank is made for a different installation. The way soil presses on a buried tank and the conditions around it need to be considered.

Find out what happens in the rainy season

Imagine an empty tank after cleaning and a pit that fills with groundwater overnight. The water around the outside can push upwards on a buried tank. It can also change the load and drainage conditions around the excavation. Tell the designer about seasonal water levels, flooding and any soil issues. Ask the manufacturer what installation it permits at that location. A buried-tank installation guide from Rotoplas illustrates why a site with groundwater needs special attention. Follow the requirements of your own model and designer.

If vehicles can drive over the tank area, tell the designer what uses the space. The structure and access cover need to suit the actual loads. Plan safe excavation and keep people away from an open pit. Coordinate the work with existing services and building foundations.

Practical example

Plan for the day the sump is empty

An empty sump after cleaning has less water inside to resist the upward force of groundwater. The site can also be wetter after heavy rain. Show the designer where water collects in the rainy season and whether cars or delivery vehicles cross the area. The tank supplier can then confirm whether the proposed model and installation method suit those conditions.

Make room for the next cleaning or repair

Provide a safe access point, protected openings, isolation valves, a way to manage overflow and a plan to drain the tank for service. Think about where tanker water enters and where surface water goes during heavy rain. If the sump stores drinking water, ask for materials and a site arrangement suitable for that use.

For an existing home, think about what a future repair would involve. Keep drawings of the buried pipes and the tank’s installation depth. Agree how workers will reach the access cover and where they can stand without blocking a driveway or common path.

Mark the source and destination

Draw where water enters, where the pump draws from and which tank it fills. Keep a copy with the service records so someone can isolate the correct line later.

Set out the pump intake and how the system will stop if the water level falls too low. Arrange cleaning through trained people and safe procedures. Give the installer your expected refill pattern and use the tank capacity and fill-time calculator to compare storage sizes before committing to excavation.

Sources

Back to blog