3 Phase Digital Auto Switch - VUKAR

Indian Agricultureಗಾಗಿ 3 Phase Digital Auto Switch Features

Mohit Vekaria

ಈ guide ಮೂಲಕ exact Three Phase Auto Switchನ documented functions check ಮಾಡಿ. Device ಅನ್ನು motor ಮತ್ತು existing starterಗೆ match ಮಾಡಿ; protection supported functions, settings ಮತ್ತು installation ಮೇಲೆ ಅವಲಂಬಿತವಾಗಿದೆ.

Three-Phase Auto Switch ನ ಸೌಲಭ್ಯಗಳ ಬಗ್ಗೆ Vukar Automation ಮೂಲಕ ತಿಳಿಯಿರಿ. ಸೂಕ್ತ ನಿಯಂತ್ರಣಗಳನ್ನು ಚರ್ಚಿಸುವಾಗ ನಿಮ್ಮ ಹೊಲದ Starter ವಿವರಗಳನ್ನು ನೀಡಿ.

Single Phasing ರಕ್ಷಣೆಯಲ್ಲಿ ಏನು ಪರಿಶೀಲಿಸಬೇಕು

Selected modelನಲ್ಲಿ phase-loss detection ಮತ್ತು trip output documented ಆಗಿದೆಯೇ ನೋಡಿ. ಈ output starter ಮೂಲಕ motor ಹೇಗೆ ನಿಲ್ಲಿಸುತ್ತದೆ ಎಂಬುದನ್ನು installer ಮೂಲಕ confirm ಮಾಡಿ. Protection feature ಎಲ್ಲ motor faults ತಡೆಯುವ guarantee ಅಲ್ಲ.

ಮುಚ್ಚಿದ ಮೋಟರ್ ನಿಯಂತ್ರಣ ಪ್ಯಾನೆಲ್ ಮತ್ತು ಹತ್ತಿರದ ತಂತ್ರಜ್ಞನಿರುವ ಕೃಷಿ ಪಂಪ್‌ಮನೆಯ ಉದಾಹರಣೆ
ಕೃಷಿ ಪಂಪ್‌ನ ಆಟೋ ಸ್ವಿಚ್ ಸ್ಟಾರ್ಟರ್ ಜೊತೆ ಕೆಲಸ ಮಾಡುತ್ತದೆ. ಆಯ್ದ ಮಾದರಿ ಬೆಂಬಲಿಸುವ ರಕ್ಷಣೆ ಮತ್ತು ಟೈಮರ್ ಕಾರ್ಯಗಳನ್ನು ಪರಿಶೀಲಿಸಿ.

Overvoltage Protection ಹೇಗೆ ಕೆಲಸ ಮಾಡುತ್ತದೆ?

Overvoltage trip function ಅನ್ನು voltage regulation ಅಥವಾ surge-protection guarantee ಎಂದು ತಿಳಿಯಬೇಡಿ. Exact model manualನಲ್ಲಿ detection range, delay ಮತ್ತು trip action confirm ಮಾಡಿ; qualified electrician installationಗೆ ತಕ್ಕ settings ಆಯ್ಕೆಮಾಡಲಿ.

Undervoltage ರಕ್ಷಣೆಯಲ್ಲಿ Cutoff ಮತ್ತು Reset ಪರಿಶೀಲನೆ

Undervoltage ರಕ್ಷಣೆಗಾಗಿ ದಾಖಲೆಯಲ್ಲಿರುವ Cutoff, Delay ಮತ್ತು Reset ವರ್ತನೆಯನ್ನು ಪರಿಶೀಲಿಸಿ. ಪದೇಪದೇ Trip ಆಗುವ Motor ಅನ್ನು ಓಡಿಸುತ್ತಲೇ ಇರಲು ಮಿತಿಗಳನ್ನು ಏರಿಸಬೇಡಿ ಅಥವಾ ಇಳಿಸಬೇಡಿ. Supply ಮತ್ತು Fault ಪರಿಶೀಲಿಸಿ.

Dry Run Protection ಎಂದರೇನು?

Dry-run detection ವಿಧಾನ modelಗೆ ತಕ್ಕಂತೆ ಬದಲಾಗುತ್ತದೆ. Documented input ಅಥವಾ sensing method ಮತ್ತು trip/reset sequence check ಮಾಡಿ; controller ನೇರವಾಗಿ water flow ಅಥವಾ borewell water level measure ಮಾಡುತ್ತದೆ ಎಂದು ಊಹಿಸಬೇಡಿ. Restart delay ಊಹಿಸುವ ಬದಲು manual follow ಮಾಡಿ.

Overload ರಕ್ಷಣೆಯ ಕಾರ್ಯಗಳು ಮತ್ತು Settings

Exact modelನ overload detection ಮತ್ತು trip functions confirm ಮಾಡಿ. Settings ಮತ್ತು starter coordination motor nameplate ಹಾಗೂ manuals ಆಧರಿಸಿರಲಿ. Overload protection, short-circuit protection ಅಥವಾ safe isolationಗೆ ಬದಲಿಯಲ್ಲ.

Cyclic Timer ನ Settings ಮತ್ತು ಕಾರ್ಯಾಚರಣೆ

Cyclic Timer ಇದ್ದರೆ ON/OFF ಅವಧಿಗಳ ವ್ಯಾಪ್ತಿ ಮತ್ತು Trip ಹಾಗೂ ಮರುಪ್ರಾರಂಭದೊಂದಿಗೆ Timer ಹೇಗೆ ಕೆಲಸ ಮಾಡುತ್ತದೆ ಎಂಬುದನ್ನು ದೃಢಪಡಿಸಿ. Pump ಓಡುವ ಸಮಯ ನಿಗದಿಪಡಿಸುವುದು Water Level ಅಳೆಯುವುದಕ್ಕೆ ಸಮಾನವಲ್ಲ. ಅನುಕ್ರಮ ನೀರಿನ ಮೂಲ ಮತ್ತು Pump ಗೆ ಸೂಕ್ತವೇ ಎಂದು Installer ಪರಿಶೀಲಿಸಬೇಕು.

Voltage, Current ಮತ್ತು Fault Display ಓದುವುದು

Display ಯಾವ voltage/current values ಮತ್ತು fault indications ತೋರಿಸುತ್ತದೆ ಎಂದು check ಮಾಡಿ. Unexpected readings ಅನ್ನು qualified supportಗಾಗಿ ದಾಖಲಿಸಿ. Display normal ಕಾಣುವುದು wiring ಅಥವಾ installation safe ಎಂಬ proof ಅಲ್ಲ.

Exact models compare ಮಾಡಿ: Three Phase Auto Switch models / Digital Panel Meters ಮತ್ತು Motor Protection Devices. Required functions selected product manualನಲ್ಲಿ confirm ಮಾಡಿ.

Product Video ಉದಾಹರಣೆಗಾಗಿ, DEV-N Product Video ಗಳನ್ನು ನೋಡಿ.

ವಿದ್ಯುತ್ ಮರಳಿದಾಗ Auto Start ಸಕ್ರಿಯಗೊಳಿಸುವ ಮೊದಲಿನ ಪರಿಶೀಲನೆ

ವಿದ್ಯುತ್ ಮರಳಿದಾಗ Auto Start ಸಕ್ರಿಯಗೊಳಿಸುವ ಮೊದಲು exact modelನ mode, delay ಮತ್ತು interlocks confirm ಮಾಡಿ. Unattended restart ಯಾರಿಗಾದರೂ ಅಪಾಯ ಉಂಟುಮಾಡಬಹುದೇ ಅಥವಾ unsuitable water conditionsನಲ್ಲಿ pump ಓಡಿಸಬಹುದೇ check ಮಾಡಿ. Automatic starting ಇದ್ದರೂ inspection ಮತ್ತು maintenance ಅಗತ್ಯ.

Auto/Manual Mode ಕಾರ್ಯಾಚರಣೆ ಮತ್ತು ಮುನ್ನೆಚ್ಚರಿಕೆಗಳು

Auto/Manual mode ಅನ್ನು exact controller manual ಪ್ರಕಾರ ಬಳಸಿ. Fault bypass ಮಾಡಲು Manual mode ಬಳಸಬೇಡಿ ಅಥವಾ ಅದು supply isolate ಮಾಡುತ್ತದೆ ಎಂದು ಊಹಿಸಬೇಡಿ. Internal wiring ಮತ್ತು inspection ಅನ್ನು qualified electrician supply isolate ಮಾಡಿ voltage ಇಲ್ಲವೆಂದು verify ಮಾಡಿದ ನಂತರ ಮಾಡಬೇಕು.

Order ಮೊದಲು selected product ಮತ್ತು destinationಗಾಗಿ current written warranty, delivery charges, COD availability ಮತ್ತು support channels confirm ಮಾಡಿ. ಈ guide fixed product lifespan ಅಥವಾ ಎಲ್ಲ ordersಗೆ free delivery ಇದೆ ಎಂದು ಹೇಳುವುದಿಲ್ಲ.

 

Back to blog